Material No.: S 31635
Description
|
|
Chemical Composition
C | Si | Mn | P | S | Cr | Mo | Ni | Ti | N | ||
---|---|---|---|---|---|---|---|---|---|---|---|
S 31635 | Min % | 16,00 | 2,00 | 10,00 | |||||||
Max % | 0,08 | 0,75 | 2,00 | 0,045 | 0,030 | 18,00 | 3,00 | 14,00 | >=5x(C+N)<=0,7 | 0,10 | |
1.4571 | Min % | 16,50 | 2,00 | 10,50 | |||||||
Max % | 0,08 | 1,00 | 2,00 | 0,045 | 0,015* | 18,50 | 2,50 | 13,50 | 5xC<=0,7 | ||
(Key to steel 2010) *S: for long term products: S<=0,30, ......for untreated products: S=0,015-0,030 Norms allow deviations for S, Ni, Cu | |||||||||||
AISI 316 Ti | Min % | 16,00 | 2,00 | 10,00 | |||||||
Max % | 0,08 | 0,75 | 2,00 | 0,045 | 0,030 | 18,00 | 3,00 | 14,00 | >=5x(C+N)<=0,70 | 0,10 | |
AISI 316 Ti (UNS S 31635) |
Physical properties
Property | Value |
---|---|
Density: kg/dm3 | 8,0 |
Hardness: HB30 | <=215 |
magnetizable | non |
Temperature T °C/F (°C/F) | Specific heat J / kgK (Btu / lb °F) | Thermal conductivity W/mK (Btu·in / ft2·h·°F) | Electric resistance µΩ · cm (Ω circ mill / ft) | Modulus of elasticity kN/mm2 (103 ksi) | Expansion rate from 70°F bis T 10-6 / K (10-6 / °F) |
---|---|---|---|---|---|
20 / 68 | 500(-) | 15(-) | 0,75 (-) | 200 (-) | 16,5(-) |
200 / 392 | 186 (-) | 17,5 (-) | |||
300 / 572 | 172 (-) | 18,0 (-) | |||
400 / 752 | 165 (-) | 18,5 (-) | |||
500 / 932 | 19,0 (-) |
Temperature | 1,0% Yield strength in high temperatures | 0,2% Yield strength in high temperatures | Tensile strenght in high temperatures | E-Modul in high temperatures |
---|---|---|---|---|
°C /°F | Rp 0, 2 | Rp 1,0 | Rm | N/mm2 / ksi | N/mm2 / ksi | N/mm2 / ksi | N /mm2 |
50 / 122 | 205 / 29,73 | 240 / 34,80 | 490 / 71 | |
100 / 212 | 190 / 27,55 | 220 / 31,90 | 440 /63,8 | 16,500 |
200 / 392 | 165 / 23,90 | 192 / 27,80 | 390 / 56,6 | 17,500 |
300 / 572 | 145 / 21,00 | 175 / 25,40 | 375 / 54,4 | 18,500 |
400 / 752 | 135 / 19,60 | 164 / 23,80 | 375 / 54,4 | 18,500 |
500 / 932 | 129 / 18,70 | 158 / 22,90 | 360 / 52,2 | 19,000 |
tubes up to 20mm width; sheets up tp 50mm width ksi value calculated |
Mechanical properties (20°C / 68°F)
1% Yield strength Rp 1,0 (Mpa/ksi) | 260 / 37,7 | ||
---|---|---|---|
Tensile strength Rm (Mpa /ksi) | 520-670/ 75,4- 97,2 | ||
Elongation A5 (%) | 40 | ||
notch impact average ISO-V | 100/60 J | <75 mm transverse |
Temparature information
Application area | ||
---|---|---|
Operation temperature | -166 ºF to 932 ºF | -454 °F minimum operating temperature by only in strain situation III |
Solution heat treatment | ||
---|---|---|
Working temperature | 1886 ºF to 2030 ºF | |
Explanation report | cool down:water/air |
annealing | ||
---|---|---|
Working temperature | 1436 ºF to 1544 ºF | |
Explanation report | cool down: water/oil, |
Solution heat treatment | ||
---|---|---|
Working temperature | 1562 ºF to 2102 ºF | |
Explanation report | cooldown: air |
Standards / information
Standards | Desciption |
---|---|
ASTM A 213 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler,Superheater,and Heat-Exchanger Tubes |
ASTM A 312 | Standard Specification for Seamless and welded austenitic stainless steel pipes |
ASTM A 479 | Rods and cross-sections made of stainless and heat-resistant steel used in boilers and other pressure tanks |
DIN EN 10088-1 (09/2005) | Stainless steels Part 1: List of stainless steels |
DIN EN 10088-3 (09/2005) | stainless steels.Technical delivery conditions for semi-finished products,bars,rods,wire selection and bright products of corrosion resisting steels for general and construction purposes |
DIN EN 10217-7 | Welded steel pipes under compression load Pipes made from stainless steel |
DIN EN 10296-2 (02/2006) | Welded circular steel pipes for machine construction and general technical service stainless steel |
DIN EN 10297-2 (02/2006) | Welded circular steel pipes for machine construction and general technical service stainless steel. Pipes made from stainless steel |
Process information
Chip removing process | hardly machinable |
---|
Welding | |
---|---|
- Material classification acc. CEN ISO/TR 15608 | 8.1 |
- Type | WIG manual arc welding submerged arc welding Laser welding MAG solid wire |
- Add. material | 1.4430;1.4576 laser welding; consult specialist literature |
Main fields of application
Details of application | - good corrosion resistance to nitric acid and organic cold acid solutions - application areas; chemical insutry; textile industry; cellulose industry |
---|---|
Certifications | |
Chemical Industry | zur Verarbeitung von Salpetersäure zur Verarbeitung von Essigsäure (z.B. Reaktoren) Apparatebau |
cellulose/paper industry | Aufschlussbehälter |
Environmental technology | Kläranlagen |
textile industry | |
cellulose/paper industry | |
Apparatus engineering | |
water management | |
pharmaceutical industry | |
crude oil |
Range of products
Product type | Product |
---|---|
Processing / Construction | from sheets from pipes, fittings, flanges (welded) |
Plates / Sheets | plates/sheets plate/sheet cuts |
Fittings | welded elbows welded reductions Welded T-pieces seamless elbows seamless reductions seamless T-pieces Other Fittings a.o. Weldolets, Nipples |
Flanges / Collars / Flared tube ends | various flanges (weld neck flange,blind flange etc.) |
Bumped boiler ends / caps / round blanks | from sheets |
Pipes / Tubes | welded pipes/tubes welded square pipes/tubes Hollow bar seamless pipes/tubes |
Bar steel | flat steel section steel round bar steel hexagon steel |
Equipment | screws, screw nuts,shims, straight turning parts, designed components |
Liability exclusion
All aforementioned specifications serve as a general orientation and have to be reviewed depending on the conditions of use.(c) 2012 M. Woite GmbH, Postbox, D-40671 Erkrath | Phone +49 (211) 24 40 91 - Fax +49 (211) 24 92 28 | www.m-woite.com - woite@woite-edelstahl.com